RC-Monster Forums - View Single Post

BrianG · 09.12.2008, 01:00 AM

It is possible to run a UBEC to each servo. Just leave the signal and ground wires intact in the servo plugs, but pull the red wire from the servo plugs and wire that to each UBEC.

	(#6)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	09.12.2008, 01:00 AM It is possible to run a UBEC to each servo. Just leave the signal and ground wires intact in the servo plugs, but pull the red wire from the servo plugs and wire that to each UBEC.