RC-Monster Forums - View Single Post - Another strange MMM observation in behaviour

bruce750i · 04:57 PM

You can run them w/o the lipo sack, just set your cut off voltage at 3.2v a cell. 3s for 11.1v with a cut off of 9.6v or 6s for 22.2v with a cut off of 19.2v. But really they are a little small. I've ran two 1800 3s in parallel (3s2p=11.1v) in my rustler, but they acted a little undersized for my setup. What motor do you have on it? IDK either about the minimum voltage.

	(#10)
bruce750i RC-Monster Aluminum Offline Posts: 972 Join Date: Feb 2008	09.18.2008, 04:55 PM You can run them w/o the lipo sack, just set your cut off voltage at 3.2v a cell. 3s for 11.1v with a cut off of 9.6v or 6s for 22.2v with a cut off of 19.2v. But really they are a little small. I've ran two 1800 3s in parallel (3s2p=11.1v) in my rustler, but they acted a little undersized for my setup. What motor do you have on it? IDK either about the minimum voltage. Last edited by bruce750i; 09.18.2008 at 04:57 PM.