RC-Monster Forums - View Single Post

Sammus · 09.25.2008, 06:52 AM

I had glitching from voltage drops (could see the Rx reset), and added a 1000uf low esr cap to no avail. IT was really strange, with the CCBEC hooked up, the lowest voltage drop I would record stabbing the throttle with an unloaded motor was 13.2 down to 8V - still enormous but still higher than what the ccbec was set at.

Removed the ccbec and no more substantial voltage drops or rx cutouts *shrugs*

	(#27)
Sammus RC-Monster Titanium Offline Posts: 1,161 Join Date: Jan 2008 Location: All over Australia.	09.25.2008, 06:52 AM I had glitching from voltage drops (could see the Rx reset), and added a 1000uf low esr cap to no avail. IT was really strange, with the CCBEC hooked up, the lowest voltage drop I would record stabbing the throttle with an unloaded motor was 13.2 down to 8V - still enormous but still higher than what the ccbec was set at. Removed the ccbec and no more substantial voltage drops or rx cutouts shrugs