RC-Monster Forums - View Single Post

JaySki · 10.13.2008, 10:34 AM

I just had another v2 fail...1515 1Y on 4S MaxAmps 8000MAH in an e-revo geared 22/58 with a UBEC. ran for ten minutes and just quit. Amber light was really dim and flickering.. Could disco batteries for a few and power it back up, but as soon as you hit the throttle, it would quit. Something smoked as you could smell it.
Just happened to be running an Eagletree V3 and can say that all levels were pretty much in line. Max Amp draw was 95 Amps. Voltage never dropped below about 14.5V. Motor RPM I think peaked out around 34K. Temps were all negligible.

	(#165)
JaySki RC-Monster Carbon Fiber Offline Posts: 136 Join Date: Aug 2008 Location: Metro Detroit	10.13.2008, 10:34 AM I just had another v2 fail...1515 1Y on 4S MaxAmps 8000MAH in an e-revo geared 22/58 with a UBEC. ran for ten minutes and just quit. Amber light was really dim and flickering.. Could disco batteries for a few and power it back up, but as soon as you hit the throttle, it would quit. Something smoked as you could smell it. Just happened to be running an Eagletree V3 and can say that all levels were pretty much in line. Max Amp draw was 95 Amps. Voltage never dropped below about 14.5V. Motor RPM I think peaked out around 34K. Temps were all negligible.