RC-Monster Forums - View Single Post - E-Revo M-Twin (Lots of Pictures)

hoovhartid · 10.16.2008, 02:02 AM

Is this in a e-revo? or converted?

Because if its in an e-revo, I made a chart that might help;
(short answer is yes, if you mount the motor in the low-cg spot)

This is used in an e-revo with a tekno neu and RCM pinion gears...
unfortunatly, I dont have a 22t, but I got the 20t pinion to mesh with a spur as small as 53T...using the low-cg mounting holes;

	(#23)
hoovhartid Monster Bottle Opener Offline Posts: 468 Join Date: Jun 2008	10.16.2008, 02:02 AM Is this in a e-revo? or converted? Because if its in an e-revo, I made a chart that might help; (short answer is yes, if you mount the motor in the low-cg spot) This is used in an e-revo with a tekno neu and RCM pinion gears... unfortunatly, I dont have a 22t, but I got the 20t pinion to mesh with a spur as small as 53T...using the low-cg mounting holes; I used a "bottom" line.