RC-Monster Forums - View Single Post - AX10

lincpimp · 09:40 PM

How do you like the outrunner? I have an 833kv motor that I plan to use in my axial based crawler on 3s lipo. Only issue is that it has a 5mm shaft... I can fit a 9t pinion and 48t spur. Should give me comparable wheel speed to a 55t on 3s, and most likely alot more power...

Found some info, the 55t is around 1160kv, so with the stock axaial 87/14 gearing the truck would do about 5mph on 3s lipo. The 833kv outrunner would require 48/14 mod 1 gearing to provide the same speed... I may even run 4s and lower gearing!

	(#6)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	10.26.2008, 09:26 PM How do you like the outrunner? I have an 833kv motor that I plan to use in my axial based crawler on 3s lipo. Only issue is that it has a 5mm shaft... I can fit a 9t pinion and 48t spur. Should give me comparable wheel speed to a 55t on 3s, and most likely alot more power... Found some info, the 55t is around 1160kv, so with the stock axaial 87/14 gearing the truck would do about 5mph on 3s lipo. The 833kv outrunner would require 48/14 mod 1 gearing to provide the same speed... I may even run 4s and lower gearing! Alot of Savage parts for sale!!! Last edited by lincpimp; 10.26.2008 at 09:40 PM. Reason: More thoughts...