RC-Monster Forums - View Single Post

DRIFT_BUGGY · 11.14.2008, 04:54 AM

I just realised that the screws that hold the shock pinion on the shaft is 2-56 x 1/4" and the screw looked about that size so I thought I would try it on the motor and it fit but you could wobble the screw a tiny bit in the hole. But isn't 2-56 bigger than 0-80?

	(#7)
DRIFT_BUGGY RC-Monster Brushless Offline Posts: 2,077 Join Date: May 2007 Location: Australia	11.14.2008, 04:54 AM I just realised that the screws that hold the shock pinion on the shaft is 2-56 x 1/4" and the screw looked about that size so I thought I would try it on the motor and it fit but you could wobble the screw a tiny bit in the hole. But isn't 2-56 bigger than 0-80? Losi 8ight MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F