RC-Monster Forums - View Single Post

JERRY2KONE · **Maybe. -** 11.23.2008, 08:02 PM

Good info Linc. Maybe you need to coat the inside of the shrinkwrap with something to keep it from sticking to the epoxy, hence making it easier to remove after the epoxy has hardened/dried. I am not sure what you can use without affecting the epoxy itself, like WD40, or Pam, or some other kind of releasing agent. The proceedure is kind of interesting to watch from the outside perspective. Thank you for sharing this with us.

	(#5)
JERRY2KONE JERRY2KONE SUPERMAXX Offline Posts: 3,452 Join Date: Sep 2006 Location: HAYMARKET VIRGINIA	Maybe. - 11.23.2008, 08:02 PM Good info Linc. Maybe you need to coat the inside of the shrinkwrap with something to keep it from sticking to the epoxy, hence making it easier to remove after the epoxy has hardened/dried. I am not sure what you can use without affecting the epoxy itself, like WD40, or Pam, or some other kind of releasing agent. The proceedure is kind of interesting to watch from the outside perspective. Thank you for sharing this with us.