RC-Monster Forums - View Single Post

Serum · 10:01 AM

yeah,yeah,yeah..

I happen to had on of the first sets in the batch.

the UE cups didn't fit, the UE shocktower didn't fit, the bearing holes weren't deep enough and the two shells weren't 100% flat.. and the 4 holes for the skid in the rear weren't tappered deep enough, the holles on the outside where a little off-centre to the bearing holes on the inside

Mike contacted FLM about it, and they did some finetuning.

Take it from me, i am very, very precise in these things, so i basicly see about averything. i also found an error in their shocktwers from the savage. (which they also corrected) And as with everything. the start-up errors need to be elliminated with feedback from users. luckely, they do something with that feedback..

Problably not the answer you expected, but this is the uncoloured truth, and after all, i still thing that the FLM bulkless is one of the best hopups for a Maxx!

	(#19)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	11.19.2005, 09:59 AM yeah,yeah,yeah.. I happen to had on of the first sets in the batch. the UE cups didn't fit, the UE shocktower didn't fit, the bearing holes weren't deep enough and the two shells weren't 100% flat.. and the 4 holes for the skid in the rear weren't tappered deep enough, the holles on the outside where a little off-centre to the bearing holes on the inside Mike contacted FLM about it, and they did some finetuning. Take it from me, i am very, very precise in these things, so i basicly see about averything. i also found an error in their shocktwers from the savage. (which they also corrected) And as with everything. the start-up errors need to be elliminated with feedback from users. luckely, they do something with that feedback.. Problably not the answer you expected, but this is the uncoloured truth, and after all, i still thing that the FLM bulkless is one of the best hopups for a Maxx! Last edited by Serum; 11.19.2005 at 10:01 AM.