RC-Monster Forums - View Single Post - Kyosho ST-RR conversion

George16 · 12.20.2008, 01:38 AM

Shark413, I have about 5 sets of Ofna diffs/gears that I can throw in there if the stock ones get sheared. With that said, I will also have to change my spur/pinion since the ofna diff I have are from the buggies which use a 43/13 ring gear/pinion.

Well see how the stock goes. I'll just have to change back to 10K for the center since I put 30K in there. I like how it's setup now but there is always room for improvement.

Thanks again.

Edit-I also installed the HB hardened gears in the CD.

	(#25)
George16 Supermaxx Offline Posts: 2,031 Join Date: Oct 2007 Location: Earth	12.20.2008, 01:38 AM Shark413, I have about 5 sets of Ofna diffs/gears that I can throw in there if the stock ones get sheared. With that said, I will also have to change my spur/pinion since the ofna diff I have are from the buggies which use a 43/13 ring gear/pinion. Well see how the stock goes. I'll just have to change back to 10K for the center since I put 30K in there. I like how it's setup now but there is always room for improvement. Thanks again. Edit-I also installed the HB hardened gears in the CD. Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer) Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2)