RC-Monster Forums - View Single Post

suicideneil · 01.24.2009, 05:28 PM

Melting the epoxy is about the only way really, but that will damage the varnish on the windings too. If you can remove the front and rear endbells, then you might be able to punch out the windings, but you are more than likely going to damage them. Why'd you want to remove them anyway?

	(#2)
suicideneil Old Skool Offline Posts: 7,494 Join Date: Feb 2007 Location: Devon, England	01.24.2009, 05:28 PM Melting the epoxy is about the only way really, but that will damage the varnish on the windings too. If you can remove the front and rear endbells, then you might be able to punch out the windings, but you are more than likely going to damage them. Why'd you want to remove them anyway? My Gmaxx thread EMAXX FAQ TUTORIALS USEFUL LINKS MY YOUTUBE