RC-Monster Forums - View Single Post

wallot · 01.28.2009, 05:41 PM

Just couple D8 tips - watch your front droop as if you have too much CVDs will be too short. Rear droop is ok.

Screws (with lock nut) that hold turnbuckles to the ackerman can get stuck under the front plastic brace after harder hit. I ended up using socket head screw put in the other way around with lock nut under the ball end. no problems since then.

couple is 2 so thats it :)

	(#4)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	01.28.2009, 05:41 PM Just couple D8 tips - watch your front droop as if you have too much CVDs will be too short. Rear droop is ok. Screws (with lock nut) that hold turnbuckles to the ackerman can get stuck under the front plastic brace after harder hit. I ended up using socket head screw put in the other way around with lock nut under the ball end. no problems since then. couple is 2 so thats it :) Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus