RC-Monster Forums - View Single Post

E-Revonut · 02.20.2009, 12:27 AM

Medusa 60mm motors have been succesfully run in a MT. They are more than adequate for a buggy. Gear for no more than 40 and you should be perfectly fine. Even if a Nitro can achieve more than 40 you'll still smoke'em! Brushless will pull so hard from every corner the nitros don't stand a chance. IMO a 70mm is overkill for a buggy and an 80mm would just be a waste!

	(#13)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	02.20.2009, 12:27 AM Medusa 60mm motors have been succesfully run in a MT. They are more than adequate for a buggy. Gear for no more than 40 and you should be perfectly fine. Even if a Nitro can achieve more than 40 you'll still smoke'em! Brushless will pull so hard from every corner the nitros don't stand a chance. IMO a 70mm is overkill for a buggy and an 80mm would just be a waste! RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh