Quote:
Originally Posted by fastbaja5b
So if I use the Zippys but stick on the 20t pinion or even gear down, I should have less issues than if I go to 25t? (Assuming a 6s set up ZIppy Lipo 5000mah 20c-30c)
..naturally that's assuming the motor isn't telling me it's undergeared (which is why the DX3s temp sensor is right on the can)
|
That is how it works. Taller gearing equals more current draw. No way to get around that. An 18t pinion sounds like a good setup to me...