RC-Monster Forums - View Single Post

othello · 05:27 AM

Looking good so far. Is this the stock tranny, spur and slipper out of an e-savage? If so ... be carefull with slipper setting. Even with a less powerfull motor (Kontronik FUN 600/2500) powered by 12 cell Nimhs (around 1000 Watt peak) my spur started to wobble after a few runs due to the heat caused by the slipper (running a n otherwise stock e-zilla). The 2200kv castle motor will melt your spur if your slipper is set to loose. Your tires won't be easy on your tranny either. The e-savage uses way lighter and smaller tires. But i guess you are already well aware of this facts.

Wheight distribution reminds me of the savage flux which features a somewhat longer wheelbase. Expect some wheelies ;-)

Do you plan on running the castle combo with nimhs or can you fit lipos inside the stock battery holder?

	(#7)
othello HV basher Offline Posts: 392 Join Date: Jun 2007 Location: Austria (Europe)	03.06.2009, 05:25 AM Looking good so far. Is this the stock tranny, spur and slipper out of an e-savage? If so ... be carefull with slipper setting. Even with a less powerfull motor (Kontronik FUN 600/2500) powered by 12 cell Nimhs (around 1000 Watt peak) my spur started to wobble after a few runs due to the heat caused by the slipper (running a n otherwise stock e-zilla). The 2200kv castle motor will melt your spur if your slipper is set to loose. Your tires won't be easy on your tranny either. The e-savage uses way lighter and smaller tires. But i guess you are already well aware of this facts. Wheight distribution reminds me of the savage flux which features a somewhat longer wheelbase. Expect some wheelies ;-) Do you plan on running the castle combo with nimhs or can you fit lipos inside the stock battery holder? Brushless 1:5 custom 4wd Baja based on 1:8 truggy chassie Jazz 55-10-32, Neu 1515/2Y (1100kv), 9s2p A123 (27v), up to 3.1KW Latest video with eagletree Data inserts: Run on asphalt Last edited by othello; 03.06.2009 at 05:27 AM.