RC-Monster Forums - View Single Post

Joey · 03.27.2009, 01:06 PM

Hmm, seems like the smallest pinion Im going to be able to use is probably a 17T due to the screws that are just underneath the motor... Cant bring the motor down far enough to use any smaller pinions. Hadnt forseen that when I made the motor mount... Right now I can get a good mesh with an 18t pinion on the brushed motor, with a brushless I think I could get 17t because they have no flux ring on the can and that will give me another millimeter or so to drop the motor.

	(#41)
Joey The Big Cheese Offline Posts: 125 Join Date: Mar 2009 Location: Georgia, USA	03.27.2009, 01:06 PM Hmm, seems like the smallest pinion Im going to be able to use is probably a 17T due to the screws that are just underneath the motor... Cant bring the motor down far enough to use any smaller pinions. Hadnt forseen that when I made the motor mount... Right now I can get a good mesh with an 18t pinion on the brushed motor, with a brushless I think I could get 17t because they have no flux ring on the can and that will give me another millimeter or so to drop the motor.