RC-Monster Forums - View Single Post - problem with V-twin e-revo

Arct1k · 04.06.2009, 02:32 PM

Sorry it is the rx I really need to see...

Things to check...

1) Both ESC leads go to the throttle connection in the ESC via Y servo lead
2) Only 1 of the two ESC's red servi wire connects to the RX (either cut one of the red wires on the branches of the y lead or remove red wire from ESC plug
3) Check direction of rotation on motors to ensure both are powering the spur in the same direction

Despite the birds nest it creates it is a simple enough setup. rgds

	(#7)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	04.06.2009, 02:32 PM Sorry it is the rx I really need to see... Things to check... 1) Both ESC leads go to the throttle connection in the ESC via Y servo lead 2) Only 1 of the two ESC's red servi wire connects to the RX (either cut one of the red wires on the branches of the y lead or remove red wire from ESC plug 3) Check direction of rotation on motors to ensure both are powering the spur in the same direction Despite the birds nest it creates it is a simple enough setup. rgds