View Single Post
Old
  (#44)
SpeedAssault
Building my dream Brushless 4wd 1/5 scale
 
SpeedAssault's Avatar
 
Offline
Posts: 311
Join Date: Nov 2008
Location: CA Bay area
04.09.2009, 10:45 AM

Quote:
Originally Posted by TDC57 View Post
You’re more than welcome we all help out each other whenever we can..

your MM will do great on 4s no worries, you might want to think about adding a fan and doing mods to it later.. Just a thought..

Jordan is you man on the Center diffs too.. here's link to them if you want or watch Ebay they have some XT8 and 808 center on there now of sale
http://www.amainhobbies.com/product_...oducts_id/8633
You will also need some of these..
http://www.amainhobbies.com/product_...oducts_id/8629 or Ebay for a better buy..

Best of luck again should be a fun build..

Bye the way thanks for the compliments..
Quote:
Originally Posted by Arct1k View Post
For 4s I would recommend adding an extra Cap either the Novak HV 2700uf or similar.

You should also get an Ubec and the 5v fan is not a bad idea...
Hey guys, thanks again on info
I have been grabbing things to sell and put on ebay so I'm buying some 5s Lipos and a MMM
Spoke to Castle, recommended the 2200 motor and 4s for 45mph and 5s for 50+mph

going with Losi aftershock diffs with my own lock/spool, may use gorilla snwatt in front diff

putting in some Losi 2.0 truggy or 8ight front Shocks
and some integy Upper revo arms
also going to find a way to mount some 1/5 wheels

It's getting Exciting
   
Reply With Quote