RC-Monster Forums - View Single Post

vashon10 · 06:26 PM

I realize this is an older thread, but I recently cracked a (new replacement) rotor in my Velineon after only 2 packs (3s, 5000mah). I'm rather puzzled how this could happen running it within spec (temps, rpms). It was in a stampede geared 21/86 with mashers.

I noticed the balance epoxy had come off one end of the rotor and smeared inside the can. Could that have jammed and caused the crack ?

	(#32)
vashon10 RC-Monster Stock Offline Posts: 5 Join Date: Feb 2009	04.20.2009, 05:45 PM I realize this is an older thread, but I recently cracked a (new replacement) rotor in my Velineon after only 2 packs (3s, 5000mah). I'm rather puzzled how this could happen running it within spec (temps, rpms). It was in a stampede geared 21/86 with mashers. I noticed the balance epoxy had come off one end of the rotor and smeared inside the can. Could that have jammed and caused the crack ? Last edited by vashon10; 04.20.2009 at 06:26 PM.