RC-Monster Forums - View Single Post

Jasper · 07:19 AM

I started with two, 6 cell GP3300 peak powerflo P/M packs. After a few runs I want more power and I put at each pack one cell. I discharged the 6 cell pack by driving and after that I put the pack on an robitronic discharge equilizer to makte them the same voltage. The extra cell was allready discharged. I soldered it together and charged it at 3A with 8MV/cell. All the cells were after charging the same temperature. The output of power was also higher.

	(#24)
Jasper RC-Monster Carbon Fiber Offline Posts: 116 Join Date: Aug 2005	12.19.2005, 07:18 AM I started with two, 6 cell GP3300 peak powerflo P/M packs. After a few runs I want more power and I put at each pack one cell. I discharged the 6 cell pack by driving and after that I put the pack on an robitronic discharge equilizer to makte them the same voltage. The extra cell was allready discharged. I soldered it together and charged it at 3A with 8MV/cell. All the cells were after charging the same temperature. The output of power was also higher. Brushless J-truggy Last edited by Jasper; 12.19.2005 at 07:19 AM.