RC-Monster Forums - View Single Post

RC-Monster Mike · 05.09.2009, 10:20 PM

With the Losi conversion, the Slipperential requires about 1mm of shimming under the motor and diff bulks to allow the 46mm spur and adjustment nut to clear. It is a drop-in fit with our Losi motor mount. No other modifications are required. :)

	(#81)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	05.09.2009, 10:20 PM With the Losi conversion, the Slipperential requires about 1mm of shimming under the motor and diff bulks to allow the 46mm spur and adjustment nut to clear. It is a drop-in fit with our Losi motor mount. No other modifications are required. :)