RC-Monster Forums - View Single Post

KMN · 05.14.2009, 01:58 AM

I'm using a G-Maxx tranny, but I did the same thing as Lincpimp. I broke the original with the stock Titans and used a bent allen key and a bench vice. After the G-maxx tranny, I used a drill bit blank.

Mcmaster has them for cheap, or your local hardware store should have some.

Make sure that when you "press" it in with the bench vice, that the ends are nice and "mushroomed" so it doesn't come out again. It will tear the plastic case, and just make a mess in aluminum.

	(#54)
KMN RC-Monster Carbon Fiber Offline Posts: 110 Join Date: Dec 2008	05.14.2009, 01:58 AM I'm using a G-Maxx tranny, but I did the same thing as Lincpimp. I broke the original with the stock Titans and used a bent allen key and a bench vice. After the G-maxx tranny, I used a drill bit blank. Mcmaster has them for cheap, or your local hardware store should have some. Make sure that when you "press" it in with the bench vice, that the ends are nice and "mushroomed" so it doesn't come out again. It will tear the plastic case, and just make a mess in aluminum.