RC-Monster Forums - View Single Post - Need help with MMM settings for a cool MedUsa

t-mange · 02:35 PM

Hi guys.

What can I change in my MMM settings to lower the motor temp and overall amperege.

Settings now are:

SW: 1.21
Lipo cutoff: 3.2v/cell
Proportional W/ Reverse lockout
Brake amoount: 40%
Drag brake: 0%
Punch control: 50%
Reverse throttle: 60%
Timing: 5*
Start power: Low
Motor: Medusa 36-70-1600
Car: Hobao Hyper 8.5 pro
Battery: Zippy Rhino 4900MaH 5s
Gearing: 13/46

Help

Magnus

	(#1)
t-mange RC-Monster Stock Offline Posts: 13 Join Date: Nov 2008 Location: Stockholm, sweden	Need help with MMM settings for a cool MedUsa - 06.03.2009, 02:31 PM Hi guys. What can I change in my MMM settings to lower the motor temp and overall amperege. Settings now are: SW: 1.21 Lipo cutoff: 3.2v/cell Proportional W/ Reverse lockout Brake amoount: 40% Drag brake: 0% Punch control: 50% Reverse throttle: 60% Timing: 5* Start power: Low Motor: Medusa 36-70-1600 Car: Hobao Hyper 8.5 pro Battery: Zippy Rhino 4900MaH 5s Gearing: 13/46 Help Magnus Hyper 8.5 Pro w/ MMM, 5s rhino, MedUsa 36-70-1600 Thunder Tiger zt w/ Sidewinder 8000kv kombo and 1300Mah 3s Last edited by t-mange; 06.03.2009 at 02:35 PM.