RC-Monster Forums - View Single Post - HB GT10 / LS10 Mods Upgrades Alternate Parts

Bondonutz · 06.14.2009, 11:24 AM

Yeah it's a tick on the short side. The shaft is a little more than 3/4 of the way through the pinion, Plenty for this application. If it was a 1/8 scale running 5s and big jumps I'd be a little more concerned.
BTW, My BAD- I have the 2300kv Turnigy BL motor,NOT 2700.

	(#26)
Bondonutz Fat Kid Engineering Offline Posts: 3,634 Join Date: Jun 2009 Location: Hot as Hell West Central Coast Florida	06.14.2009, 11:24 AM Yeah it's a tick on the short side. The shaft is a little more than 3/4 of the way through the pinion, Plenty for this application. If it was a 1/8 scale running 5s and big jumps I'd be a little more concerned. BTW, My BAD- I have the 2300kv Turnigy BL motor,NOT 2700. I retired from RC, now life is all about guns and long range shooting.