[NoControl]

Thanks for the extra info TSP, BTw 1st sentance says revo, I was just wondering since the lower the motors kv is the higher the input voltage accepted is without getting too close to max rpms and due to the higher voltages used the lower the current draw keeping all the stuff a little bit cooler and I just figured since medusa's are in my price range and that they offer a larger kv selction then the CCneus that a 2000 would be betwen a 1600 and a 2200 for a nice middle area to offer lower temps and a wider range of operating settings to allow between 40 and 75mph and the choice of 4-6s and as far as torque goes if brians calc is correct the medusa offers more torque in both 70mm and the 80mm cans but only by about .05 and axel torque is off only by .26 all the way around.