RC-Monster Forums - View Single Post

Unsullied_Spy · 06.27.2009, 06:31 AM

They're 3mm diameter, how long depends on the width of your mount. After screwing in screws that were too long and trashing a ~$260 Neu (costing $105 to fix) I am VERY careful about my measurements. IIRC I use a 3x8mm cap head with one of Mike's mounts, you can go about 5mm into the motor before hitting the coils but the CC motors have a kevlar cover over the coils to help prevent this.

	(#3)
Unsullied_Spy RC-Monster Titanium Offline Posts: 1,609 Join Date: Aug 2008 Location: Bozeman, Montana	06.27.2009, 06:31 AM They're 3mm diameter, how long depends on the width of your mount. After screwing in screws that were too long and trashing a ~$260 Neu (costing $105 to fix) I am VERY careful about my measurements. IIRC I use a 3x8mm cap head with one of Mike's mounts, you can go about 5mm into the motor before hitting the coils but the CC motors have a kevlar cover over the coils to help prevent this. All I ever wanted was an honest weeks pay for an honest days work.