RC-Monster Forums - View Single Post - Mamba Maxx in Slash

scarletboa · 06:47 PM

the 4600kv will work better than the 5700km will as far as temps go.

edit: the 6900 will technically work, but you need to gear it as low as possible. there is a guy with the 7700kv in his slash at my LHS and he can only run for 5-8mins at a time because the motor runs hot. he usually stops it at 180F.

	(#4)
scarletboa RC-Monster Aluminum Offline Posts: 929 Join Date: Mar 2009 Location: Las Vegas NV	06.28.2009, 06:46 PM the 4600kv will work better than the 5700km will as far as temps go. edit: the 6900 will technically work, but you need to gear it as low as possible. there is a guy with the 7700kv in his slash at my LHS and he can only run for 5-8mins at a time because the motor runs hot. he usually stops it at 180F. They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40. Last edited by scarletboa; 06.28.2009 at 06:47 PM.