RC-Monster Forums - View Single Post

MetalMan · 01.08.2006, 06:20 PM

1. You can use any charger that can charge at 3.7amps or less. Lipos (unless otherwise stated) should not be charged higher than 1C, where "C" equals the capacity in amp-hours.

2. You could use a single or dual chargers. If it were me choosing, I would pick whichever setup that would be cheapest.

3. 90% charge in 1 hour (at 1C charge rate), and 1 1/4 - 1 1/2 hours for full charge (at 1C charge rate).

	(#23)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	01.08.2006, 06:20 PM 1. You can use any charger that can charge at 3.7amps or less. Lipos (unless otherwise stated) should not be charged higher than 1C, where "C" equals the capacity in amp-hours. 2. You could use a single or dual chargers. If it were me choosing, I would pick whichever setup that would be cheapest. 3. 90% charge in 1 hour (at 1C charge rate), and 1 1/4 - 1 1/2 hours for full charge (at 1C charge rate). SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz