RC-Monster Forums - View Single Post

florianz · 07.14.2009, 06:45 AM

off-topic:

I wanted to "spice up" the cable & plugs of the motor, and I thought, well, I try 5,5mm bullet plugs. sh****t, the're massive

harr harr, that should be sufficient... w/ the original cables of the esc, the cables got quite warm after hard bashing. So I took 4mm cables, and it got less warm. I think w/ those 5,5mm plugs and the 6 mm² cables (between 9 and 10 awg) I should be on the safe side

I have the esc placed above the steering servo to have more weight on the front end (better steering, less wheelies etc.), so a bigger diameter makes sense.

flo
(aka Mr. Frankenstein)

	(#48)
florianz RC-Monster Carbon Fiber Offline Posts: 354 Join Date: Sep 2008 Location: Hamburg, Germany	07.14.2009, 06:45 AM off-topic: I wanted to "spice up" the cable & plugs of the motor, and I thought, well, I try 5,5mm bullet plugs. sh****t, the're massive harr harr, that should be sufficient... w/ the original cables of the esc, the cables got quite warm after hard bashing. So I took 4mm cables, and it got less warm. I think w/ those 5,5mm plugs and the 6 mm² cables (between 9 and 10 awg) I should be on the safe side I have the esc placed above the steering servo to have more weight on the front end (better steering, less wheelies etc.), so a bigger diameter makes sense. flo (aka Mr. Frankenstein)