RC-Monster Forums - View Single Post - MGM TMM 28025-3S E series no BEEPS

aqwut · 11:14 AM

Yeah, Finnster.. I played with all of that for more than a few hours... I've tried everything except plugging the cable in the other way...

Problem is, it doesn't beep at all... THe UBEC works fine though... It doesn't take programming from the Tx and/or USBCom++ I haven't even used this ESC yet, as it never worked.... but I keep trying because the BEC Works on it...I took the shrink wrap off and tested all the wires and solder joints.. everything was fine... I'm really stumped with this thing... I've tried everything that I could think of...

	(#13)
aqwut Brushless Heavy Weight.... Offline Posts: 1,954 Join Date: Sep 2005 Location: Kingsville, Ontario	08.17.2009, 11:08 AM Yeah, Finnster.. I played with all of that for more than a few hours... I've tried everything except plugging the cable in the other way... Problem is, it doesn't beep at all... THe UBEC works fine though... It doesn't take programming from the Tx and/or USBCom++ I haven't even used this ESC yet, as it never worked.... but I keep trying because the BEC Works on it...I took the shrink wrap off and tested all the wires and solder joints.. everything was fine... I'm really stumped with this thing... I've tried everything that I could think of... The Power of BRUSHLESS!!!!! http://www.geocities.com/aqwut 1HP (electric) = 746 Watts. Everything is brushless!! Last edited by aqwut; 08.17.2009 at 11:14 AM.