RC-Monster Forums - View Single Post

Finnster · 03:04 PM

BTW... What do you mean by stripping an outlet?
You do have a proper power cord (mains connector) right? Really there should be one with the equipment to be sure the power cord can handle the load of the machine. You don't want to have the wrong gauge wire. There should not be any soldering either. Everything should be done by screw terminals.

If this thing is expensive, it might be worth the $ to call an electrician so nothing gets fraked up.

	(#5)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	11.11.2009, 03:02 PM BTW... What do you mean by stripping an outlet? You do have a proper power cord (mains connector) right? Really there should be one with the equipment to be sure the power cord can handle the load of the machine. You don't want to have the wrong gauge wire. There should not be any soldering either. Everything should be done by screw terminals. If this thing is expensive, it might be worth the $ to call an electrician so nothing gets fraked up. Last edited by Finnster; 11.11.2009 at 03:04 PM.