RC-Monster Forums - View Single Post

JThiessen · 12.03.2009, 04:16 PM

[QUOTE=suicideneil;336838]Nothing wrong with 2x 5s lipos in parallel to make 5300mah, and the 3s ones are fine, though the 30c packs are somewhat cheaper and more proven.

[QUOTE]

DOH! I didn't even look at it in that perspective....yeah, that would be a good setup. And it does look like they will fit as long as the thickness they have on it is somewhat accurate.

5S is the perfect setup on a stock flux. 4S too weak, 6S is a blast, but a little out of control.

If you were to buy a Castle motor, you'd have to get a custom mount made due to the fins on the can. I think Mike built one for someone else a month or so back. I personally dont see any reason to change the stock motor - you can tune it via battery selection and the programming on the MMM.

	(#7)
JThiessen RC-Monster Brushless Offline Posts: 2,436 Join Date: Nov 2005 Location: Edmonds WA	12.03.2009, 04:16 PM [QUOTE=suicideneil;336838]Nothing wrong with 2x 5s lipos in parallel to make 5300mah, and the 3s ones are fine, though the 30c packs are somewhat cheaper and more proven. [QUOTE] DOH! I didn't even look at it in that perspective....yeah, that would be a good setup. And it does look like they will fit as long as the thickness they have on it is somewhat accurate. 5S is the perfect setup on a stock flux. 4S too weak, 6S is a blast, but a little out of control. If you were to buy a Castle motor, you'd have to get a custom mount made due to the fins on the can. I think Mike built one for someone else a month or so back. I personally dont see any reason to change the stock motor - you can tune it via battery selection and the programming on the MMM. Losi 8T 1.0, Savage Flux - XL style, LST XXL, Muggy, 3.3 E-Revo Conversion and sitting outside 425hp, 831 Tq Dodge Ram Turbo Diesel. It SMOKES