RC-Monster Forums - View Single Post

Unsullied_Spy · 12.11.2009, 05:21 PM

If we were to harden them at home (heat until cherry red then quench in used oil) would they be any better or would that make them worse? I ran an RC-M pinion for about 8 months before changing it out and there's a slight bit of wear on it (just from tons of use), I need something that's going to last as well as or close to an RC-M pinion.

Mike: Any chances of getting us some 6mm bore Mod 1 pinions?

	(#228)
Unsullied_Spy RC-Monster Titanium Offline Posts: 1,609 Join Date: Aug 2008 Location: Bozeman, Montana	12.11.2009, 05:21 PM If we were to harden them at home (heat until cherry red then quench in used oil) would they be any better or would that make them worse? I ran an RC-M pinion for about 8 months before changing it out and there's a slight bit of wear on it (just from tons of use), I need something that's going to last as well as or close to an RC-M pinion. Mike: Any chances of getting us some 6mm bore Mod 1 pinions? All I ever wanted was an honest weeks pay for an honest days work.