RC-Monster Forums - View Single Post

E-Revonut · 01:17 PM

After reading I have an excellent idea for you! Ditch the 3906 slipper and do the mod to run a 3905 slipper!!! It's not that hard, costs about $30 in parts and a little time. If you search there are threads in here explaining how to do it. I did the mod on my first project, a G2R revo that used a 3906 tranny, because I to melted the spur which resluted in a snapped motor shaft!!!

After getting the proper slipper in there even the plastic shafts hold up well. When I do wear one out or break one I keep it cause they break in different places and I have made spare shafts out of broken ones.

	(#16)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	01.14.2010, 01:15 PM After reading I have an excellent idea for you! Ditch the 3906 slipper and do the mod to run a 3905 slipper!!! It's not that hard, costs about $30 in parts and a little time. If you search there are threads in here explaining how to do it. I did the mod on my first project, a G2R revo that used a 3906 tranny, because I to melted the spur which resluted in a snapped motor shaft!!! After getting the proper slipper in there even the plastic shafts hold up well. When I do wear one out or break one I keep it cause they break in different places and I have made spare shafts out of broken ones. RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh Last edited by E-Revonut; 01.14.2010 at 01:17 PM.