Quote:
Originally Posted by fsracer
That motor is only rated for 4s lipo, are you guys doing anything to get it to work with
5s.
|
Sounds like they are using 5s lipos to get it to operate properly on 5s....
Max neu motor speed for a 15 series is 60k rpm. Seeing that the cc motors are based off the 15 series I would say the spec applies. The MMM can handle 6s lipo max so I see no reason not to run the 2650 on 5s. Good for speed runs, just watch gearing and temps. I would not try to run a lst on 5s geared for 50 with this, but in an 1/8 buggy/onroad it should be fine. Tire weight is much lower.