RC-Monster Forums - View Single Post - Driveshaft Kit needed for Extended Chassis?

RC-Monster Mike · **driveshaft kit -** 12.11.2004, 10:25 AM

The ext. chassis can be used with a stock plastic driveshaft taken from one of the axles. If you must have the metal shafts, those are the ones that I use. They fit perfectly, too. I have also used left over driveshafts from other vehicles in a pinch. The MP/Dominator front driveshaft works perfectly on the front, while the rear dogbone from an 1/8 buggy works on the rear (not as nice a fit -needs fuel tubing to help hold it in place). If you want the convenience of a kit, the SM/UE kit you linked is the one to go with.

	(#2)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	driveshaft kit - 12.11.2004, 10:25 AM The ext. chassis can be used with a stock plastic driveshaft taken from one of the axles. If you must have the metal shafts, those are the ones that I use. They fit perfectly, too. I have also used left over driveshafts from other vehicles in a pinch. The MP/Dominator front driveshaft works perfectly on the front, while the rear dogbone from an 1/8 buggy works on the rear (not as nice a fit -needs fuel tubing to help hold it in place). If you want the convenience of a kit, the SM/UE kit you linked is the one to go with.