RC-Monster Forums - View Single Post

JThiessen · 02.23.2010, 10:49 PM

Send it to Tekno. If they measure it and its "good", then they can send you a 42mm mount for your motor. You could then wrap your motor with some aluminum tape to get it snug if you want. If its bad, they'll send you a good one. Much better than trying to mill out the one you have.

Only other real option is to take it to a machine shop and they could possibly mount it to a lathe and open it up some.

	(#15)
JThiessen RC-Monster Brushless Offline Posts: 2,436 Join Date: Nov 2005 Location: Edmonds WA	02.23.2010, 10:49 PM Send it to Tekno. If they measure it and its "good", then they can send you a 42mm mount for your motor. You could then wrap your motor with some aluminum tape to get it snug if you want. If its bad, they'll send you a good one. Much better than trying to mill out the one you have. Only other real option is to take it to a machine shop and they could possibly mount it to a lathe and open it up some. Losi 8T 1.0, Savage Flux - XL style, LST XXL, Muggy, 3.3 E-Revo Conversion and sitting outside 425hp, 831 Tq Dodge Ram Turbo Diesel. It SMOKES