RC-Monster Forums - View Single Post - PLEASE READ.ESCThrottle calibrating problem(savage conversion)

suicideneil · 06:29 PM

Calibrate again without the reverse set on the tx, then swap the outer two motor wires around to the esc. That should do the trick.

	(#5)
suicideneil Old Skool Offline Posts: 7,494 Join Date: Feb 2007 Location: Devon, England	03.03.2010, 06:27 PM Calibrate again without the reverse set on the tx, then swap the outer two motor wires around to the esc. That should do the trick. My Gmaxx thread EMAXX FAQ TUTORIALS USEFUL LINKS MY YOUTUBE Last edited by suicideneil; 03.03.2010 at 06:29 PM.