RC-Monster Forums - View Single Post - Project : Mugen MBX6-T Racer

wallot · 03:14 AM

Aluminum drivetrain parts work great on my friend's nitro buggy no wear at all so i am giving them a try.

gearing will be 46/16 with 14-17 pinions available, 1700kv neu 5s
4000mah for 10minute runs
I can make 10 minutes with 3300 but it is pushing battery to the limit and car is very light that sometimes I fight with traction so I used to run 5000mah just for the added weight (on my old mbx5-t)

	(#23)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	04.01.2010, 03:11 AM Aluminum drivetrain parts work great on my friend's nitro buggy no wear at all so i am giving them a try. gearing will be 46/16 with 14-17 pinions available, 1700kv neu 5s 4000mah for 10minute runs I can make 10 minutes with 3300 but it is pushing battery to the limit and car is very light that sometimes I fight with traction so I used to run 5000mah just for the added weight (on my old mbx5-t) Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus Last edited by wallot; 04.01.2010 at 03:14 AM.