RC-Monster Forums - View Single Post

mrsnuggles · 05.02.2010, 10:12 AM

i talked to steve neu and he said it would be no problem making a 1900 series inrunner with shaft extending through both ends in 8 mm

i'm planning a direct drive myself and my calculations are that about 200 kv motor is needed for 6s but lower kv for higher s count. these calculations are for bullet proof diff ratio and 7 inch tires.

	(#43)
mrsnuggles RC-Monster Stock Offline Posts: 11 Join Date: May 2009	05.02.2010, 10:12 AM i talked to steve neu and he said it would be no problem making a 1900 series inrunner with shaft extending through both ends in 8 mm i'm planning a direct drive myself and my calculations are that about 200 kv motor is needed for 6s but lower kv for higher s count. these calculations are for bullet proof diff ratio and 7 inch tires.