[E-Revonut]

Figured a little update was needed here. I'm still running my waterproofed MMM. It was 80*+ here today and I went out with my E-Maxx. I am running a TeknoNeu 1515 2.5D in it now, would rather see the Medusa going unused than my Neu. I have the lowest gearing I can run in it 68/20, the motor is tight against the tranny to get a good mesh. Speed is still more than stock and torque is through the roof. Went out running 4s 4500mah and got 28minutes until I hit the lvc. I was perfecting the backflip through a dainage ditch and running in grass. I wasn't constant wot by every time I came through the ditch it was pinned on the way out until it landed, followed by a run in grass onto pavement and then do it all over again. At the end of the run lipos where at 110, motor 148, and the fan never came on on the esc but it is still working. I have given up on trying to get a reading through the case cause it's not gonna be very accurate. Any how the esc is still running strong and not missing a beat in the hot weather, even when coated with liquid tape. As I said before though, if your pushing a lot of current making speed runs I don't suggest this. In a MT geared for low 30's it is holding up well