RC-Monster Forums - View Single Post - Instead of a Pinion, Use a clutch bell? and double check my gearing please.

Jahay · 07.16.2010, 07:04 AM

Thank you for the fast response...

1. How strong are these motors are taking abuse? i have basically been running my savage with the slipper tightened all the way so far... Should the motor be fine? As long as i dont land and big jumps on power then nothing should really go wrong correct??? I dont mind my weak point being my pinion as it is easy enough to change, i just dont want to be replacing my f/r diffs and CD spur.

2. i guess having a very small pinion means it will wear very fast... at least that will wear and hopefully wont wear out my spur too quickly...

I was looking at the Novak Pinions, hopefully they should be all gd

	(#3)
Jahay RC-Monster Titanium Offline Posts: 1,007 Join Date: Apr 2010	07.16.2010, 07:04 AM Thank you for the fast response... 1. How strong are these motors are taking abuse? i have basically been running my savage with the slipper tightened all the way so far... Should the motor be fine? As long as i dont land and big jumps on power then nothing should really go wrong correct??? I dont mind my weak point being my pinion as it is easy enough to change, i just dont want to be replacing my f/r diffs and CD spur. 2. i guess having a very small pinion means it will wear very fast... at least that will wear and hopefully wont wear out my spur too quickly... I was looking at the Novak Pinions, hopefully they should be all gd