RC-Monster Forums - View Single Post - Appropriate temp range for Slipperential?

itbvolks · 08.20.2010, 01:30 PM

The diff fluid will tolerate way hotter. 400+ degrees. It's the shear that breaks it down.

I'd agree with above, really high temps will be tougher on the bearings and slipper pads. I'd guess 200* would still be acceptable on the faces of the slipper back plate.

	(#4)
itbvolks RC-Monster Carbon Fiber Offline Posts: 119 Join Date: Mar 2010	08.20.2010, 01:30 PM The diff fluid will tolerate way hotter. 400+ degrees. It's the shear that breaks it down. I'd agree with above, really high temps will be tougher on the bearings and slipper pads. I'd guess 200* would still be acceptable on the faces of the slipper back plate.