RC-Monster Forums - View Single Post

Nard Cox · 12:29 PM

The air version also should have a 5mm shaft according to the website:

17 Series Air Motor

1717-1500KV
Brushless Air Motor
ONLY $70.00

The 17 Series motors feature high quality oversized bearings, sintered Neodymium magnets, superior electromagnetic design, and rigorous engineering control in our own factory.

The 1717-1500 has 2 flats milled on it. Flat to flat is 46mm. Off the flats the can diameter is 49.5mm. The 1717-1500 will work on the Align Trex 600 with motor mount mods (holes opened up for larger screws to fit holes in the motor).

Shaft 5mm
Diameter 2.0" (49.5mm)
Height 3.4" (85mm)
Wire Connector 6.5mm
Shaft length from motor face 0.8" (21mm)

	(#326)
Nard Cox n00b Offline Posts: 519 Join Date: Apr 2009 Location: The Netherlands	10.08.2010, 12:27 PM The air version also should have a 5mm shaft according to the website: 17 Series Air Motor 1717-1500KV Brushless Air Motor ONLY $70.00 The 17 Series motors feature high quality oversized bearings, sintered Neodymium magnets, superior electromagnetic design, and rigorous engineering control in our own factory. The 1717-1500 has 2 flats milled on it. Flat to flat is 46mm. Off the flats the can diameter is 49.5mm. The 1717-1500 will work on the Align Trex 600 with motor mount mods (holes opened up for larger screws to fit holes in the motor). Shaft 5mm Diameter 2.0" (49.5mm) Height 3.4" (85mm) Wire Connector 6.5mm Shaft length from motor face 0.8" (21mm) Mugen MBX6Te RCM + Mugen MBX6e RCM + Savage Flux XL FLM + MERV all with Spectrum DX3S \|\| WTS&WTB Last edited by Nard Cox; 10.08.2010 at 12:29 PM.