RC-Monster Forums - View Single Post

ZippyBasher · 02:21 AM

So I got a MonoBlock from UE. UPS Sucks now. Took a week in there hands. It did need a bit of Finessing with the dremel but nothing major...

Anyway, I thought the LST2 CVD would fit but as it turned out, it barely sat in the tranny side drive cup. So, no way I'd run it. I measured and came up with about 140mm or so and I just ordered the Savage XL Rear dogbone which was 142mm. Well I used the FLM cups for the tranny side and MGT Cups on my LST diffs. AND It fits PERFECT!

Fits Snug no play, couldnt be better. If you have an FLM 3905 chassis and Monoblock this is a great solution. $7.50 shipped on Ebay.

SO, Here is where the first run ended. I slid sideways on some very loose dirt. Slid into a small "ditch" made by some recent rain and it may have been a curb because it bent the Hell out of the FLM lower arm. I have RPM uppers and maybe this would be better with FLM uppers too. I have been using this combo now for about 10 months or so and I didnt think I was going too fast. Maybe its just one of those things.... Look at this carnage at least its only a $7.00 fix...

	(#21)
ZippyBasher 8th scale Stunt-Driver/Mechanic Offline Posts: 441 Join Date: Dec 2008 Location: SoCal	11.19.2010, 02:20 AM So I got a MonoBlock from UE. UPS Sucks now. Took a week in there hands. It did need a bit of Finessing with the dremel but nothing major... Anyway, I thought the LST2 CVD would fit but as it turned out, it barely sat in the tranny side drive cup. So, no way I'd run it. I measured and came up with about 140mm or so and I just ordered the Savage XL Rear dogbone which was 142mm. Well I used the FLM cups for the tranny side and MGT Cups on my LST diffs. AND It fits PERFECT! Fits Snug no play, couldnt be better. If you have an FLM 3905 chassis and Monoblock this is a great solution. $7.50 shipped on Ebay. SO, Here is where the first run ended. I slid sideways on some very loose dirt. Slid into a small "ditch" made by some recent rain and it may have been a curb because it bent the Hell out of the FLM lower arm. I have RPM uppers and maybe this would be better with FLM uppers too. I have been using this combo now for about 10 months or so and I didnt think I was going too fast. Maybe its just one of those things.... Look at this carnage at least its only a $7.00 fix... Maxx - FLM, MMM, CD Med.36x706s Raja - FLM Ext. MM, 1512, 4s SC8ight - MMM, 1520, 6s D8T - MMM 1717 6s My OVERPOWERED Rides "CLICK" Like Playing Cards? Cut-Throat Rummy "CLICK" Last edited by ZippyBasher; 11.19.2010 at 02:21 AM.