RC-Monster Forums - View Single Post - Inferno ST-RR Gearing Question

simplechamp · 04:53 PM

I would start out with the 52/13 and go from there. Run it and watch temps closely, and you can decide how you like the torque and top speed, and also decide if the temps are reasonable. I can say with a 1.06:1 rollout ratio you will have plenty of torque.

As for the spur gears, I personally have never had an issue with steel and choose to use those, but some people do prefer plastic, it's a personal preference you can experiment with.

	(#9)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	11.29.2010, 04:51 PM I would start out with the 52/13 and go from there. Run it and watch temps closely, and you can decide how you like the torque and top speed, and also decide if the temps are reasonable. I can say with a 1.06:1 rollout ratio you will have plenty of torque. As for the spur gears, I personally have never had an issue with steel and choose to use those, but some people do prefer plastic, it's a personal preference you can experiment with. Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10 Last edited by simplechamp; 11.29.2010 at 04:53 PM.