RC-Monster Forums - View Single Post

fastbaja5b · 12.22.2010, 08:28 PM

I run a Savox 1267MG servo in my SCRT10, with the MM Pro internal BEC it powered the servo ok with a receiver cap, but wouldn't power the LED's at all (5mm) even if I upped it to 6/7V. I'm running a cheap Hextronik 3 Amp BEC now and all is fine, servos, lights, no receiver cap. Strange because my external BEC specs are on par with the MM Pro's internal BEC specs. Perhaps it's over rated, or this Hextronik is underrated?

	(#8)
fastbaja5b RC-Monster Aluminum Offline Posts: 704 Join Date: May 2008	12.22.2010, 08:28 PM I run a Savox 1267MG servo in my SCRT10, with the MM Pro internal BEC it powered the servo ok with a receiver cap, but wouldn't power the LED's at all (5mm) even if I upped it to 6/7V. I'm running a cheap Hextronik 3 Amp BEC now and all is fine, servos, lights, no receiver cap. Strange because my external BEC specs are on par with the MM Pro's internal BEC specs. Perhaps it's over rated, or this Hextronik is underrated? Say Less, Do More.