View Single Post
Old
  (#10)
scarletboa
RC-Monster Aluminum
 
scarletboa's Avatar
 
Offline
Posts: 929
Join Date: Mar 2009
Location: Las Vegas NV
12.27.2010, 02:34 AM

Quote:
Originally Posted by lincpimp View Post
So I have decided to go with the turnigy 8s charger. Does anyone have experience with this (accucell 8150)?
both the turnigy and eco line of hobbycity chargers are fine. i actually prefer the eco line of chargers a little more due to better heatsinking and better performing fans. my main charger right now is the eco6-10 200w charger. it cost $32 in the US warehouse and it is perfectly accurate and charges any battery chemistry. i have even charged a dead 105ah car battery at 10 amps continuously for 5 hours and the charger was only lukewarm. (maybe 10F higher than ambient)

my old charger is a turnigy accucel-6 and the 50w limit got old pretty quick when charging 4-6s lipos. with my eco charger, i can charge anything at 10a except for 6s, which will still do 9a.

i also have a GT power 6-10 200w charger, but i killed the balancer when i hooked 2 3s lipos in series the wrong way and shorted out the 3rd cell resisters in the charger. now, that charger cannot balance cell #3 and cell #3 will come off that charger too high. this charger is now specifically used for non-lithium batteries.


They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40.

Last edited by scarletboa; 12.27.2010 at 02:38 AM.
   
Reply With Quote