+1 vote for 5mm
I'm running a Lehner Basic XXL with a 4mm shaft. I am using 5mm pinions and a 4mm to 5mm sleeve. Hell, I'm running a Lehner 1530-8Turn in my E-Revo 1/16th. I have 4mm pinions for all my rides ;-)
I bore all my 48p pinions myself. I put 3.15mm pinions in the chuck of my drill press, and I press them on to a 5/32" drill bit held in a vice.
Quote:
Originally Posted by Pdelcast
Yeah -- the shaft through the motor is 5mm, and it's turned down to 3.15mm so standard pinions can be used.
If there is enough interest, we could do a 5mm shaft version.
Thanx!
|