RC-Monster Forums - View Single Post

simplechamp · 05:33 PM

I am using the IRC Hot Bodies Lightning Stadium alloy cups. Nova RC also makes an alloy cup, any Kyosho 777/HotBodies/Jammin cup should work, they are the same size.

They DO NOT use a sliding block however, just the slots in the walls of the diff cup.

I am using the HotBodies hardened steel internals, 8101-1. I do not know if the SHD Savage outdrive cups will fit, they are listed as 9x11x34 but I don't know exactly what those dimensions are for. The outdrives used by the IRC cups (and most other 1/8 outdrives) are 6mm shaft.

I hope I have not been confusing everyone, but my diffs I built up are not in a Savage, they are in Jammin bulkheads. I just posted in the thread to let you guys know about the IRC diff cups and the hardened internals, and that they would work together.

	(#31)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	01.31.2011, 05:25 PM I am using the IRC Hot Bodies Lightning Stadium alloy cups. Nova RC also makes an alloy cup, any Kyosho 777/HotBodies/Jammin cup should work, they are the same size. They DO NOT use a sliding block however, just the slots in the walls of the diff cup. I am using the HotBodies hardened steel internals, 8101-1. I do not know if the SHD Savage outdrive cups will fit, they are listed as 9x11x34 but I don't know exactly what those dimensions are for. The outdrives used by the IRC cups (and most other 1/8 outdrives) are 6mm shaft. I hope I have not been confusing everyone, but my diffs I built up are not in a Savage, they are in Jammin bulkheads. I just posted in the thread to let you guys know about the IRC diff cups and the hardened internals, and that they would work together. Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10 Last edited by simplechamp; 01.31.2011 at 05:33 PM.